LAB 1500
High-capacity laboratory glassware washer and dryer
The LAB 1500 is a high-capacity glassware washer and dryer specially developed for laboratories that require to clean large quantities of items on a daily basis. This lab washer features a full-visibility, motorized, space-saving, sliding-down door.
Two heavy duty washing pumps dedicated to separate washing – providing a high water-flow rate combined with adequate spray pressure – ensure outstanding glassware washing results. The availability of an optional pre-heated tank allows to perform a final non-recirculated rinse.
This unit is capable of injection washing on up to 6 levels with 8 possible rack locations, providing maximum flexibility through multiple chamber configurations depending on the height of the loaded items. All the levels are equipped with telescopic bearing rails that enable easy and safe loading and unloading of the glassware. The upper levels can be removed depending on the height of the loaded glassware.
As standard, two peristaltic pumps provide precise dosing of liquid chemicals. A convenient hinged door allows for easy access to storage of up to two 10-liter / 2.64-gal chemical tanks. The optional filtered-forced-air drying system with adjustable time and temperature settings helps to ensure the complete inside and outside drying of all the glassware. To assure full control of the process, the device is controlled by a PLC digital controller with a user-friendly color touch-screen HMI.
High and flexible capacity
With a chamber volume of about 484 l / 19.95 cu ft, this device has the highest chamber-to-footprint capacity ratio in the market. The device is capable of injection washing on up to 6 levels with 8 possible rack locations, providing maximum flexibility through multiple chamber configurations.
Washing efficacy
High-quality AISI 316 L washing chamber and four rotating spray arms – two on the bottom and two on the top of the chamber – ensure optimal washing performance. Additional spray arms are available on dedicated upper-level wash carts.
Wide range of racks, inserts, trays and components
A comprehensive choice of racks and components to meet different capacity and cleaning demands, allowing to maximize the numbers of different utensils and glassware that can be washed, preventing movement and damage, and ensuring complete coverage of the loads.
Aquatic tank kit
Specific kit designed for the reprocessing of aquatic tanks used in vivarium and research facilities. It includes three chemical dosage pumps, an upgrade to washing circuit, flow meters, and conductivity probe.
Features
Flexible solutions
The electrical or steam stainless steel heat exchanger provides rapid heating of water in washer sump.
Drying efficacy
Built-in HEPA H14-filtered forced-air drying system with adjustable temperature and time settings helps to ensure the complete internal and external drying of all the glassware.
Pre-heating tank
A pre-heating tank configured with electrical heating elements allows for a non-recirculated final rinse.
Process quality
Flow meters for redundancy chemical dosing control and a conductivity sensor for accurate measuring of the conductivity value during the final rinse are available as options.
7" user-friendly HMI
Industrial PLC with intuitive 7″ touch-screen HMI, allowing for 65 programming options.
Full traceability
On-board integrated thermal printer for recording washing phases with detailed information. USB port for software back-up and restore. Audit Trail / User Management / Electronic Signature according 21 CFR 11 available upon request.
Solutions
Laboratory Solutions
Laboratories rely on reliable cleaning, sterilization and, where required, decontamination to protect result integrity and safe working conditions. SteelcoBelimed provides solutions for clinical, analytical and quality control, research and development, vivarium, biocontainment and specialty laboratories, supporting diverse workflows with equipment ranging from compact systems to scalable installations.
Steelco-branded laboratory glassware washers comply to the current European directives and standards as follows: 2006/42/EC, 2014/35/EU, 2014/30/EU and 2011/65/EU Directives, EN 61010-1, EN 61010-2-040, EN 61326-1, EN ISO 15883-1 current standards.
Overall dimensions (WxDxH)
1350 x 840 x 1985 mm
53 x 33 x 78 in
Chamber volume
~ 568 l / 20 cu ft
Basket volume
~ 369 l / 13 cu ft
Related Products
LAB 640 SL
Freestanding Glassware Washer
LAB 660 – LAB 680
High-capacity hinged-door glassware washers
LAB 1000
High capacity pass-through glassware washer
